Why does my Dreame DreameBot D10s Vacuum Cleaner robot not perform scheduled cleaning?
Scheduled cleaning will not start unless the robot has at least 15% battery left, so if your Dreame Vacuum Cleaner robot does not perform scheduled cleaning, it may have low battery.
How to troubleshoot a Dreame Vacuum Cleaner robot that does not recharge?
If your Dreame Vacuum Cleaner robot does not recharge, the charging dock may not be receiving power or there may be poor contact. Confirm that both ends of the power cord are plugged in correctly. Clean the charging contacts of the charging dock and robot.
What to do if Dreame DreameBot D10s Vacuum Cleaner doesn't recharge?
If your Dreame Vacuum Cleaner isn't recharging, first confirm that both ends of the power cord are plugged in correctly. Also, clean the charging contacts of the charging dock and the robot, as poor contact may be the issue.
How to fix Dreame DreameBot D10s Vacuum Cleaner that doesn't turn on?
If your Dreame Vacuum Cleaner doesn't turn on, the battery level is likely low. Recharge the robot on the charging dock, then try again.
Why doesn’t my Dreame Vacuum Cleaner robot return to charging dock after being moved?
If your Dreame Vacuum Cleaner robot doesn’t return to charging dock after being moved, moving the robot may cause it to re-position itself or re-map its surroundings. If the robot is too far from the charging dock, it might not be able to automatically return on its own, in which case you need to manually place the robot onto the charging dock.
Why doesn't my Dreame DreameBot D10s robot resume cleaning after charging?
If your Dreame Vacuum Cleaner robot doesn't resume cleaning after charging, make sure the robot is not set to Do Not Disturb mode (DND), which will prevent it from resuming cleaning. The robot also does not resume cleaning when it is manually recharged or placed onto the charging dock.
Why no water comes out of mopping module of Dreame Vacuum Cleaner?
If no water comes out of the mopping module of your Dreame Vacuum Cleaner, check whether there is water inside the water tank. Clean the mop if it becomes dirty. Make sure the mop pad is installed correctly according to the User Manual. Clean the air hole on the top of the water tank.
Why Dreame DreameBot D10s Vacuum Cleaner doesn’t return to charging dock after being moved?
Moving the Dreame Vacuum Cleaner may cause it to re-position itself or re-map its surroundings. If the robot is too far from the charging dock, it might not be able to automatically return on its own, in which case you need to manually place the robot onto the charging dock.
Why Dreame Vacuum Cleaner cannot connect to Wi-Fi?
There might be several reasons why your Dreame Vacuum Cleaner cannot connect to Wi-Fi: - There may be an issue with the Wi-Fi connection. Reset the Wi-Fi and download the latest version of the Dreamehome app, then try reconnecting. - The location permission might not be enabled. Ensure the location permission on the Dreamehome app is enabled. - The Wi-Fi signal could be weak. Make sure the robot is in an area with good Wi-Fi coverage. - The robot may be trying to connect to a 5GHz Wi-Fi network, which is not supported. Ensure your robot connects to a 2.4GHz Wi-Fi network. - The username or password of the Wi-Fi may be incorrect. Please enter the correct username and password.
Why is my Dreame Vacuum Cleaner robot not cleaning efficiently?
If your Dreame Vacuum Cleaner robot no longer cleans efficiently or leaves dust behind, the dust bin may be full, the filter may be blocked, or a foreign object may be caught in the main brush. Please clean the dust bin, clean the filter, and clean the main brush.
General| Suction Power | 4000 Pa |
|---|---|
| Battery Capacity | 5200 mAh |
| Run Time | 150 minutes |
| Mapping | Yes |
| App Control | Yes |
| Auto-Empty Station Compatibility | No |
| Mopping Function | Yes |
| Virtual Boundaries | Yes, via app |
| Carpet Detection | Yes |
| Climbing Ability | Up to 20 mm |
| Dustbin Capacity | 400 ml |
| Obstacle Avoidance | Yes |
| Voice Control | Yes |
| Noise Level | 65 dB |
| Navigation Technology | LDS Laser Navigation |
Guidance on safe operation, age limits, and environmental conditions for the robot.
Precautions for handling, charging, and disposing of the robot's batteries.
Details on the laser sensor's compliance and eye safety precautions during use.
Lists and describes all included components of the robot vacuum.
Identifies and explains the buttons, indicators, and covers on the robot.
Details the location of robot sensors and the components of the dust bin.
Explains the robot's mopping system and charging station components.
Guides the initial setup and creation of a cleaning map for the robot.
Basic operations for powering, starting, and pausing the robot.
Explains different cleaning modes and the spot cleaning function.
How to schedule cleanings and manage the Do Not Disturb mode.
Using the Dreamehome app for advanced control and mopping.
Step-by-step guide for cleaning the robot's dust bin and filter.
Instructions for cleaning the water tank and mop pad.
How to clean hair and debris from the main and side brushes.
Cleaning key sensors and charging contacts for optimal performance.
Procedures for restarting the robot and maintaining battery health.
Step-by-step instructions for safely removing the robot's battery.
Guidance on proper disposal of electronic waste according to WEEE directives.
To Next Page