15
EN
3. Pull the wire organizer
Ⓙ
backward to wrap the water pipes and wire.
4. Place the controller assembly
Ⓖ
with the bottom side down in the proper
position.
Installation Instruction
❼
Tidy Up the Water Pipes and Wire
1. Clamp the water pipes and wire with wire organizer
Ⓙ
.
2. Thread the bottom of the wire organizer
Ⓙ
into the spiral cable wrap
Ⓚ
.
Spiral Cable
Wrap
Ⓚ
Wire
Organizer
Ⓙ
Wire Organizer
Ⓙ
To Next Page
