Need help?Do you have a question about the Dreame RLS6LADC and is the answer not in the manual?
General| Model Number | RLS6LADC |
|---|---|
| Category | Vacuum Cleaner |
| Suction Power | 4000 Pa |
| Battery Capacity | 5200 mAh |
| Navigation | LDS Laser Navigation |
| Obstacle Avoidance | Yes |
| Mopping Function | Yes |
| Operating Time | Up to 180 minutes |
| Weight | 3.7 kg |
| Connectivity | Wi-Fi |
| Auto Recharge | Yes |
| Virtual Boundary | Yes, via App |
| Charging Time | 4 hours |
| Noise Level | 65 dB |
Guidelines and limitations for the safe operation of the robot vacuum, including age and environmental restrictions.
Identification and description of the various sensors on the robot for navigation and obstacle avoidance.
Methods for ensuring safe robot operation by placing barriers at stairs and sofas, and managing furniture.
Guide for essential pre-operation tasks, including removing protective strips and installing the side brush and mop assembly.
Recommended clearances around the base station for optimal Wi-Fi signal and functionality, and surface considerations.
How to place the robot on the base station for the first time and ensure it begins charging.
Steps for installing the cleaner bottle and filling the clean water tank for mopping functions.
Instructions for downloading the Dreamehome or Mi Home/Xiaomi Home app and connecting it to the robot.
Process for adding the 'DreameBot L10s Ultra' device within the app for Wi-Fi connection and control.
Initiating the mapping process to create a floor plan for efficient cleaning routes.
Turning the robot on/off and pausing/resuming its cleaning or charging cycles.
Initiating the combined sweeping and mopping operation, route planning, and map utilization.
Table outlining recommended maintenance frequency and replacement periods for various robot and base station components.
To Next Page
