18
The robot will turn off automatically if it is left in the sleep mode for more than 12
hours.
If the robot is paused and placed onto the base station, the current cleaning process
will end.
Do Not Disturb (DND) Mode
When the robot is set to the Do Not Disturb (DND) mode, the robot will be prevented from
resuming cleaning and the power indicator goes out. The DND mode is disabled by default at
the factory. You can use the app to enable the DND mode or modify the DND period. The
DND period is 22:00-8:00 by default.
Note:
The scheduled cleaning tasks will be performed on time during the DND period.
The robot will resume clean-up where it left off after the DND period expires.
Spot Cleaning
When the robot is on standby, briefly press the button to enable the spot cleaning mode.
In this mode, the robot cleans a square-shaped area of 1.5 x 1.5 meters around it and returns
to its starting point once the spot cleaning is completed.
Robot Restarting
If the robot stops responding or cannot be turned off, press, and hold the button for 10
seconds to forcefully turn it off. Then, press and hold the button for 3 seconds to turn the
robot on.
Sweeping & Mopping
Note: When using the mop assembly for the first time, the robot performs the sweeping and
mopping task by default.
To Next Page
Loading...
Need help?
General
