Dreame RLS6LADC-6 - Laser Safety Information

4
EN
Laser Safety
Information
Safety Information

·
The laser sensor in this product meets the IEC 60825-1: 2014 Standard for Class
1 laser products. Please avoid direct eye contact with it during use.
Hereby, Dreame Trading（Tianjin）Co., Ltd. declares that the radio equipment type RLS6LADC-6 is in compliance with Directive 2014/53/EU. The full text of the EU
declaration of conformity is available at the following internet address: https://global.dreametech.com
For detailed e-manual, please go to https://global.dreametech.com/pages/user-manuals-and-faqs

·
Make sure the robot is turned off when being transported and kept in its
original packaging if possible.

·
If the robot will not be used for an extended period of time, fully charge it, then
turn it off and store it in a cool, dry place. Recharge the robot at least once
every 3 months to avoid over-discharging the battery.

·
The lithium-ion battery pack contains substances that are hazardous to the
environment. Before disposing of the robot vacuum, please first remove the
battery pack, then discard, or recycle it in accordance with local laws and
regulations of the country or region it is used in.

·
When removing the batteries from the product, it is better to use up the
batteries and make sure your product is disconnected from power.
1) Uninstall the screw on the bottom, then remove the cover.
2) Unplug the battery connector, then remove the batteries. Do not damage the
battery case to avoid any risk of injuries.
3) Return the batteries to a professional recycling organization.
Batteries and
Charging