Using the red plastic tags as
guides, carefully pierce the
fabric with a sharp pair of
scissors, then insert the bolts
(provided with your divan) into
Lift the headboard above the
bolts, aligning the struts (legs),
Once the mattress is in place,
adjust the headboard height
and secure the bolts until tight.
Attaching your strutted headboard
1
Remove accessories kit
attached to headboard
containing 2 bolts.
Lay the headboard on its front
holes. Adjust the struts (legs) so
they point downwards, aligning
Using a screwdriver, screw the
struts into place until tight.
Locate the red plastic
tags on the base. Consider
carefully which end to pierce,
particularly if your bed has
storage that needs to be
Only pierce the end you intend
to attach the headboard to.
2 3 4 5 6
To Next Page
Loading...
