DREAMS FLORENCE User Manual

1 of 4
FLORENCE DOUBLE BED
Assembly Instructions
NOTE: It will require two people to assemble this bed. Assembly should be carried out in the room that
the bed will be used in.
3ᇬ43
1. We suggest you spend a short time reading through this leaflet and then follow
the simple step by step instructions.
2. If you follow the instructions carefully the end result should be worth the effort.
3. Do not discard any of the packaging until you have checked that you have all
the parts and the pack of fittings.
4. Assemble this product on a carpet.
5. To ensure an easier assembly, we strongly advise that all fittings are only
finger tightened during initial assembly. Only upon completion of the assembly
should all fixing points be fully tightened.
6. We recommend a periodic check on all fixing points to make sure they remain
fully tightened.
7. Keep glue and fittings out of childrenʼs reach.
In the unlikely event that this product has missing or damaged parts, please call
 to obtain spares
Before you Start
here is some
helpful advice.
Minimum No. of people
Recommended to assemble
This product.
Approx assembly time:
X

DREAMS FLORENCE Specifications

General

Brand	DREAMS
Model	FLORENCE
Category	Indoor Furnishing
Language	English

Summary

Assembly Instructions Overview

Helpful Advice Before Assembly

Provides essential advice before starting assembly, including reading instructions, checking parts, and safe handling.

Component Parts and Fittings

Assembly Steps Part 1

Step 1: Attach Side Rails

Instructions for connecting side rails to the head and foot boards using bolts, washers, and nuts.

Step 2: Adjust Support Legs

Details on how to adjust the height of the bed's support legs to three different modes.

Assembly Steps Part 2

Step 3: Secure Legs to Slat Frame

Guidance on using bolts to attach the legs securely to the bed's slat frame.

Step 4: Fix Slats Frame

Instructions for locating and securing the slats frame onto the bed using bolts and nuts.