DREAMS Westbrook Bunk

Need help?

Do you have a question about the DREAMS Westbrook Bunk and is the answer not in the manual?

Summary

Getting Started and Safety

Assembly Tips

Identify all parts and fittings before building. Lay them out to check and familiarize yourself.

Top Tip for Assembly

Build the bed in the room it will be located in to prevent damage during moving.

Safety and Care Guidelines

Keep children and animals away from assembly area due to small components and suffocation risk.

Customer Support and Recycling

Contact customer service for issues or missing parts. Dispose of packaging safely and recycle where possible.

Product Components and Tools

Parts List

Lists all components required for assembly, including Base Legs, Head/Foot Ends, Side Rails, Protect Frame, Ladder, and Metal Slats.

Fittings List

Details all fittings required for assembly, including various bolts, an Allen Key, and Slat Buckles.

Required Tools

Lists the necessary tools for assembly, which include scissors and a tape measure.

Assembly Instructions

Head and Foot End Assembly

Attach Base Leg (01) to Upper Head/Foot End (03) and Lower Head/Foot End (02) to Base Leg (01).

Side Rail Assembly

Attach Lower Side Rails (06/07) and Upper Side Rail (04) to headend/footend, loosely tightening bolts initially.

Slat System Assembly

Insert metal slats and secure them to the side rails using plastic buckles.

Protect Frame and Ladder Installation

Decide ladder placement and fit protect frame on the opposite side. Options for placement are detailed.

Bed Frame Finalization

Insert caps into holes to finalize the bed frame assembly.

Final Checks and Usage Notes

Assembled Unit Overview

The fully assembled bunk bed unit is shown. Important note on mattress thickness and placement.

Important Usage Notes

Do not stand on the bed before mattress. Assemble on a smooth surface. Recommended mattress size and thickness.

Safety Warnings

Warnings regarding strangulation, entrapment, and structural integrity. Not for children under six years.

Care and Maintenance

Cleaning Recommendations

Clean with a warm damp cloth. Avoid abrasive chemicals or bleach to prevent product damage.

Checking and Moving Advice

Periodically check fixtures. Lift the bed when moving to prevent floor damage.

Material Care Tips

Notes on wood and fabric variations and fading. Dust metal furniture gently and keep dry.

This manual describes the assembly, usage, and maintenance of the Westbrook Bunk bed, a practical and stylish solution for a room.

Function Description

The Westbrook Bunk is a metal-framed bunk bed designed for sleeping. It features two sleeping levels, an upper and a lower, and includes a ladder for access to the upper bunk and a protective frame for safety. The bed is designed for two-person assembly and has an estimated assembly time of 3/4 hour.

Important Technical Specifications

Mattress Size: The recommended mattress size is 90x190cm.
Mattress Thickness: The mattress thickness should not exceed 17cm. The maximum thickness of the mattress must be below the level of the mark on the bunk.
Compliance: The product complies with European Standard BS EN 747-1:2012+A1:2015 & 747-2:2012+A1:2015.
Components:
- Base Leg (01): 4 pcs
- Lower Head/Foot End (02): 2 pcs
- Upper Head/Foot End (03): 2 pcs
- Upper Side Rail (04): 1 pc
- Upper Inside Frame (05): 1 pc
- Lower Side Rail (06): 1 pc
- Lower Side Rail (07): 1 pc
- Protect Frame (08): 1 pc
- Ladder (09): 1 pc
- Metal Slat (10): 48 pcs
Fittings:
- Bolt (M6 x 50mm) (A): 14 pcs
- Bolt (M6 x 20mm) (B): 16 pcs
- Bolt (M6 x 15mm) (C): 5 pcs
- Allen Key (D): 1 pc
- Slat Buckle (E): 46 pcs
- Caps (Dia 17mm) (F): 1 pc
- Caps (Dia 10mm) (G): 9 pcs

Usage Features

Assembly: The bed requires two people for assembly and takes approximately 45 minutes. It is recommended to build the bed in its intended room to prevent damage during movement.
Safety Warnings:
- Children under six years old should not use high beds or the upper bunk due to the risk of injury from falls.
- Bunk beds and high beds pose a serious risk of injury from strangulation if not used correctly. Users should never attach or hang items not designed for the bed (e.g., ropes, strings, cords, hooks, belts, bags).
- Children can become trapped between the bed and adjacent structures (walls, roof pitches, ceilings, furniture). To avoid serious injury, the distance between the top safety barrier and any adjoining structure must not exceed 75mm or must be greater than 230mm.
- The bunk bed/high bed should not be used if any structural part is broken or missing.
- Do not stand on the bed before placing the mattress.
Ladder and Protect Frame Placement: The manual provides options for fitting the ladder and protect frame:
- Option 01: Ladder on the right side, protect frame on the left side.
- Option 02: Ladder on the left side, protect frame on the right side. This decision must be made before assembling the protect frame and ladder.

Maintenance Features

Cleaning: The bed should be cleaned with a warm, damp cloth. Abrasive chemicals or bleach should not be used as they may damage the product.
Checking and Moving: Periodically, users should check that screws or fixtures have not become loose. When moving the bed, it is recommended to lift it rather than drag or push it to prevent damage to flooring.
Wood Care (if applicable): While the Westbrook Bunk is primarily metal, the manual includes general advice for wooden components. Wood markings and shade can vary, and wood may lighten or fade over time due to light exposure.
Fabric Care (if applicable): The manual includes general advice for fabric components. Fabric color shade can appear different depending on lighting and surroundings, and may lighten or fade over time due to light exposure.
Metal Care: Metal furniture should be gently dusted and kept dry to maintain its appearance. Metal is generally resilient to everyday wear and tear.
Ventilation: Ensure the room is well ventilated to keep humidity low and prevent mold formation in and around the bunk frame.
Recycling: Packaging should be disposed of safely and environmentally friendly, with recycling encouraged where possible. The assembly instructions are printed on recycled paper and should be kept for future reference.