DREAMS WOODSTOCK User Manual

Woodstock – Double Bed / King Bed
Page 1 of 5
Assembly Instructions
1. We suggest you spend a short time reading through this leaflet and then follow
the simple step by step instructions.
2. If you follow the instructions carefully the end result should be worth the effort.
3. Do not discard any of the packaging until you have checked that you have all
the parts and the pack of fittings.
4. Assemble this product on a carpet.
5. To ensure an easier assembly, we strongly advise that all fittings are only
finger tightened during initial assembly. Only upon completion of the assembly
should all fixing points be fully tightened.
6. We recommend a periodic check on all fixing points to make sure they remain
fully tightened.
7. Keep glue and fittings out of children’s reach.
the unlikely event that this product has missing or damaged parts, please call
0344 292 0000 to obtain spares
spare
Before you
Start, here
are some
helpful
advices.

DREAMS WOODSTOCK Specifications

General

Brand	DREAMS
Model	WOODSTOCK
Category	Indoor Furnishing
Language	English

Summary

Assembly Instructions

Helpful Advice Before Starting Assembly

Provides essential preparatory advice for assembling the bed, emphasizing reading instructions and checking parts.

Product Components and Fittings

Parts Identification

Lists and visually identifies all structural components of the bed, such as headboard, footboard, and side rails.

Fittings List

Details the necessary hardware and fittings required for assembly, including bolts, washers, and Allen keys.

Bed Assembly Procedure

Step 1: Connecting Side Rails

Instructions for fixing the side rails to the headboard and footboard using bolts and an Allen key.

Step 2: Fitting Fixed Wood Slats

Procedure for attaching fixed wood slats to the bedstead using bolts, washers, and nuts.

Step 3: Fitting Sprung Slats

Method for fitting sprung slats onto the bedstead, including securing support legs.