Drehmo Matic C - Page 5

DREHMO

Instruction manual for USB adaptor kit page 5 of 20
The following table gives a reference overview for the adapter usage in combination with the
various electronic units.
Adapt
o
r
unit
reference
unit
function
unit
connector
PC
-
Tool
chapter
SER01 DMC - 02.x
from revision 5
Matic C
base plate
X11
(lower side)
Matic C
Operator
3.1.1
DMC - 14 Matic C
profibus DP-V1
TEST Matic C
Operator
3.1.2
DiM - 09 i-matic
DeviceNet
X2, X3 WinGate
1
3.1.3
DMC - 30 Matic C
LCD display unit
CN1 Flash
Magic
2
3.1.4
DiM - 24 i-matic
accumulator unit
CN1 Flash
Magic
2
3.1.5
SER02 DiM - 02 i-matic
display unit IR / IrII
X2 i-matic
Explorer
3.2.1
DiM - 22 i-matic
display unit
Bluetooth
X2 i-matic
Explorer
3.2.2
SER03 DMC - 02.x
all revisions
Matic C
base plate
X6
(upper side)
Matic C
Operator
3.3.1
SER04 DiM - 17 i-matic
modbus loop unit
XT i-matic
Explorer
3.4.1
Remark:
A connection to the units DiM – 09, DMC – 30 and DiM – 24 is only allowed for
especially trained staff. The usage of the given tools by strictly following the
instruction manuals of the electronic units is required. Otherwise, the intended
function of the units may be disturbed.
1
WinGate - Tool of company Deutschmann Automation
2
Flash Magic – Tool of Embedded Systems Academy / Philips Semiconductors