DREHMO
Instruction manual for USB adaptor kit page 4 of 20
Serial communication is supported on the PC side by means of separate software. Available
are the software tools i-matic Explorer and Matic C Operator. The corresponding user
manuals have to be observed.
1.2.2 Delivery content
The adaptor kit comprises an USB cable with a DREHMO specific programmed USB-serial
converter and three different adaptor units SER01, SER02, SER03.
A separate adapter cable SER04 for the use in combination with the i-matic modbus loop
interface unit DiM - 17 is furthermore available:
To Next Page
Loading...
