BLUETOOTH LED
The Bluetooth LED I indicates the tool is connected to
the smart device 7
•
•
by turning the variable speed dial G in either
direction 7
• After completing this process you should see the
connected tool in the App and the Bluetooth LED
BATTERY LEVEL INDICATOR
7
Detailed battery charge information of your tool can be
STALL PROTECTION
This tool has a stall protection feature built into it to
feature further protects the motor and the battery from
MAINTENANCE AND CLEANING
!
NO USER SERVICEABLE PARTS INSIDE.
PREVENTIVE MAINTENANCE PERFORMED
BY UNAUTHORIZED PERSONNEL MAY RESULT IN
INCORRECT CONNECTION OF INTERNAL WIRING
AND COMPONENTS WHICH COULD CAUSE
SERIOUS HAZARD.
Always wear safety goggles
when cleaning tools with compressed air.
!
TO AVOID ACCIDENTS, ALWAYS
DISCONNECT THE TOOL AND/OR CHARGER
FROM THE POWER SUPPLY BEFORE CLEANING
clean the tool by inserting pointed objects through an
!
CERTAIN CLEANING AGENTS AND
SOLVENTS DAMAGE PLASTIC PARTS.
Some of these are: gasoline, carbon tetrachloride,
chlorinated cleaning solvents, ammonia and household
detergents that contain ammonia.
SERVICE AND WARRANTY
We recommend that all tool service be performed by a
CONTACT DREMEL
NOISE AND VIBRATION
2
Vibration uncertainty K m/s
2
NOTE: The declared vibration total value(s) and the
declared noise emission value(s) have been measured
in accordance with a standard test method and may be
used for comparing one tool with another; they may
also be used in a preliminary assessment of exposure.
conditions of use and identify the safety measures for
DISPOSAL
separately and disposed of in an environmentally
ONLY FOR EC COUNTRIES
6
no longer usable must be collected separately and
25
To Next Page
Loading...
