To Next PageTo Next Page
Need help?Do you have a question about the Dremel PawControl 7760-PGK and is the answer not in the manual?
General| Power Source | Battery |
|---|---|
| Battery Voltage | 7.2 V |
| Battery Type | Lithium-Ion |
| Speed | Variable |
| Application | Pet Grooming |
| Included Accessories | Sanding Bands |
Ensures a safe and productive environment by keeping the workspace clean and well-lit.
Guidelines for safe use of electrical power tools, including plug matching and avoiding wet conditions.
Precautions for operator safety, including alertness, PPE, and proper tool handling.
Specific safety instructions for various rotary tool operations like grinding and sanding.
Explains kickback as a sudden reaction and provides precautions to avoid it.
Detailed safety advice for grinding and abrasive cutting tasks with rotary tools.
Precautions for using wire brushes, including managing bristles and pressure.
Key guidelines for charging the tool, including temperature limits and adapter usage.
Instructions on how to properly store and handle batteries to prevent hazards.
Guidance on the environmentally sound disposal and recycling of batteries.
Details the components and technical specifications of the Dremel PawControl tool.
Description of the pet grooming attachment and its parts.
Information on the EZ Lock mandrel and sanding disc for accessory changes.
Explains the function of the charge indicator light on the tool.
Step-by-step guide for loading a mandrel into the rotary tool.
Instructions for correctly mounting a sanding disc onto the mandrel.
Guide on how to properly attach the nail guard to the tool.
Explains the benefits of using a rotary tool over traditional clippers for pet nails.
Describes the anatomy of a pet's nail, including the quick, for safe grooming.
Detailed steps on how to hold the tool and groom the pet's nails.
Advice for ensuring pet safety during grooming, including handling hair and securing the pet.
Information on available Dremel collet sizes for accessories.
Guidance on holding and operating the rotary tool for various tasks.
Explanation of the tool's switch for turning it on/off and adjusting speed.
Description of mandrels used for attaching accessories like discs and wheels.
Recommended speed settings for various High Speed Cutters.
Recommended speed settings for Tungsten Carbide Cutters.
Recommended speed settings for various Engraving Cutters.
Recommended speed settings for Silicon Carbide Grinding Stones.
Recommended speed settings for Diamond Wheel Points.
Recommended speed settings for Structured Tooth Tungsten Carbide Cutters.
