33 34
technical specifications
• Sensor type: CMOS
• Water Resistant (weatherproof)
• Video resolution: 1080p, 720p & SD
• Video format: .MOV (H.264 codec)
• Frames per second:
25 / 30 / 50 / 60 / 90 FPS in SD
25 / 30 / 50 / 60 FPS in 720p
25 / 30 FPS in 1080p
• Video format: 16:9
• Lens Rotation: 300°
• Recording Angles: 127° in 1080p, 170° in 720p & SD
• Exposure: Auto / Manual (advanced users)
• Zoom: Digital x4 (in 1080p, 720p & SD resolutions)
• Remote range: 3 meters (10 feet)
• Built-in Microphone
• Inputs: 2.5mm External Microphone
• Audio/Video Output: Micro HDMI (cable not included)
• Battery: 1100mAh rechargeable lithium-ion
• Power-Save option saves batteries by powering down the screen
• Memory capacity: Supports Micro SD memory cards up to 32GB
• Photo resolution: 9 Megapixel
• LCD screen: 1.5” colour TFT
• Lens focal range: 0.5m to innity
• Dimensions:
Camera - 105 (L) x 50 (D) x 37 (W) mm
Remote Control - 52 (L) x 40 (W) x 13 (D) mm
• Power: Camera - DC 3.7V / Remote control: DC 3V, 1x CR2032 battery (included)
• RF: Receiver (Camera): 433.92MHz ISM band / Transmitter (Remote): 433.92MHz
ISM band
• Weight: Camera - 120g / Remote control - 19g
• Operating Systems: Compatible with Windows XP, Vista & Windows 7; Mac OS 10.2
onwards.
further help
We make every eort to ensure the accuracy and appropriateness of the information
provided on our products. We encourage you to contact our Technical Support Team
on info@driftinnovation.com with any problems and/or suggestions.
Please note that the Technical Support Team cannot issue or authorise any Returns /
RMA's or replacements.
For a Return / RMA or replacement please contact the place of purchase.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) ....... this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
WARNING
Changes or modifications to this unit not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
NOTE
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment o and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the
receiver is connected.
• Consult the dealer or an experienced radio / TV technician for help.
To Next Page
Loading...