• When the engine is running in the intensive mode, press the clock button
and will appear on the clock log screen for a countdown back from 03:00
minutes.
5. Use the "24h" clock.
• The watch is set by the manufacturer to "12:00". When the extractor is
disconnected from the current the clock automatically returns to 12:00, so it
must be re-programmed by the consumer.
• When the extractor is in standby mode (Note: it is not necessary to press
the power supply button) pressing the "Clock" button will turn on the clock
indicator and "12:00" will flash on the display.
(Note: For minutes, the highest number is 59;
Larger numbers are invalid). Press "Clock" button to recognize it. When the
backlight and the indicator light go off, the hours and minutes have already been
set.
LOW SPEED:
• For simmering that does not produce much steam
• Ventilate the kitchen.
AVERAGE SPEED:
• For standard meals.
HIGH SPEED:
• When large amounts of steam and smoke will occur (prolonged frying and
cooking under pressure).
• Always return to medium speed as soon as possible.
FOR THE MAXIMUM EFFICIENCY OF YOUR EXTRACTOR:
• Use the back cooking zones on your stove of preference.
• We suggest turning on the extractor as soon as you start cooking and let it
run a few more minutes as soon as you finish cooking if necessary.
Note:
To Next Page
Loading...