3. ANNUAL CLEANING:
• Activation of the carbon filter.
Only installed extractors are applied as a re-circulation unit (not ventilated outside).
This filter catches the odors and must be changed at least once a year depending
on the use given. Buy these filters from your dealer (with the reference number that
appears on the nameplate inside the extractor) and take control when you change
them.
DANGER:
Disconnect the extractor before servicing:
• Remove the filter.
• Place the new carbon filter into the blower of the extractor inside the
surface, and then put it directly.
• Repeat the same operation for each of the filters.
• Arrange the filter again.
4. CHANGING THE BULBS
Disconnect or shut off the extractor before beginning maintenance.
• Unscrew the screw securing the light cover.
• Tilt back.
• The type of bulb you use is
2W LED, replace the light bulb and screw the new one
(see diagram)...
To Next Page
Loading...