Page 2SKU 91396 For technical questions, please call 1-800-444-3353.
SPECIFICATIONS
Electrical Requirements Battery Charger Input: 120VAC / 60Hz
Battery Output: 18 VDC
Battery Amp Rating: 1.2 Amp - hr
Battery Charging Time:
7 Hours Initial / 5 to 7 Hrs. Subsequent Charges
Drill Specications 18 V / 550 RPM / 3/8” Keyless Chuck
Variable Speed / Reversible / 6 Torque Settings
Pistol Grip / Squeeze Trigger
Flashlight Specications 18 V / 5 Watt Bulb
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures, parts list and assembly
diagram. Keep your invoice with this manual. Write the invoice number on the inside
of the front cover. Keep this manual and invoice in a safe and dry place for future
reference.
GENERAL SAFETY RULES
WARNING! Read all instructions
Failure to follow all instructions listed below may result in electric shock,
re, and/or serious injury. The term “power tool” in all of the warnings listed
below refers to your line-operated (corded) power tool or battery-operated
(cordless) power tool.
SAVE THESE INSTRUCTIONS
WORK AREA
Keep your work area clean and well lit.1. Cluttered benches and dark areas
invite accidents.
Do not operate power tools in explosive atmospheres, such as in the 2.
presence of ammable liquids, gases, or dust. Power tools create sparks
which may ignite the dust or fumes.
Keep bystanders, children, and visitors away while operating a power tool. 3.
Distractions can cause you to lose control. Protect others in the work area from
debris such as chips and sparks. Provide barriers or shields as needed.
REV 10b, 10e
To Next Page
Loading...
