Drill Master 93440 - User Manual

3/8” CORDLESS DRILL
18 VOLT - KEYLESS CHUCK
Model 93440
ASSEMBLY AND OPERATING INSTRUCTIONS
Diagrams within this manual may not be drawn proportionally.
Due to continuing improvements, actual product may differ slightly from the product described herein.
Distributed exclusively by Harbor Freight Tools
®
.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
Read this material before using this product. Failure
to do so can result in serious injury.
SAVE THIS MANUAL.
Copyright
©
2005 by Harbor Freight Tools
®
. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions or replacement parts, please call 1-800-444-3353.
Revised 09e

Summary

Assembly and Operating Instructions

Product Specifications

General Safety Rules

Work Area Safety

Electrical Safety

Precautions related to proper grounding and electrical connections.

Grounding Information

Grounded Tools: Three Prong Plugs

Double Insulated Tools: Two Prong Plugs

Unpacking Instructions

Assembly and Operating Instructions Details

Charging and Recharging The Battery

Guides on how to safely charge and recharge the tool's battery.

Drill Torque Selector Operation

Instructions on how to set and use the drill's torque selector.

Forward;Reverse Switch Functionality

Drill Bit Installation and Removal

Operating the Drill

Guidance on how to properly operate the cordless drill.

Inspection, Maintenance, and Cleaning

Troubleshooting Guide

Drill Master 93440 Specifications

General

Type	Corded Drill
Chuck Size	3/8 inch
Voltage	120V
Speed	0-2500 RPM
Power Source	Corded Electric
Weight	3.5 lbs