To Next PageTo Next PageWhy Drill Master Drill will not start?
The Drill Master Drill may not start due to several reasons: the battery might not be connected properly (ensure it is correctly connected), the battery could be low (recharge it for 3-5 hours), or the battery might be defective (consider replacing it).
What to do if Drill Master 96526 Drill gives unsatisfactory drilling results?
If you are experiencing unsatisfactory drilling results with your Drill Master Drill, it could be due to a dull drill bit (use a sharp drill bit), the drill bit might be improperly installed in the chuck (ensure it is securely installed), or you may be using an improper drilling technique. See “Drilling An Object” section.
Explains the safety alert symbol and defines DANGER, WARNING, CAUTION, and NOTICE.
Advice on staying alert, using common sense, and wearing appropriate safety equipment.
Safety measures for battery chargers and precautions for individuals with pacemakers.
Guidance on how to charge the battery before using the drill/driver.
Detailed steps for charging the 19.2V Ni-Cd battery and important usage notes.
Instructions on how to connect the charged battery pack to the drill/driver unit.
How to operate the forward, reverse, and locked positions of the switch.
Step-by-step guide on how to change drill bits and screwdriver bits.
Solutions for common problems like the drill not starting or unsatisfactory drilling results.
General| Brand | Drill Master |
|---|---|
| Model | 96526 |
| Category | Drill |
| Language | English |
