Page 10 For technical questions, please call 1-800-444-3353. Item 92623
Specifications
Electrical Rating 120V~ / 60Hz / 10A
Motor No Load Speed 200-3377 RPM
Max. Accessory Diameter
Spindle Thread
Accessories
(sold separately)
Backing Pad
Foam Pad
Polishing Bonnet
Sanding Discs
3150240
Setup - Before Use:
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION:
Release the Trigger and unplug the tool from its electrical outlet before
assembling or making any adjustments to the tool.
Note: For additional information regarding the parts listed in the following pages,
refer to the Assembly Diagram near the end of this manual.
SAFETY OPERATION MAINTENANCESETUP
To Next Page
Loading...
