Drinkwell Platinum - Motor Maintenance; Importance of motor cleaning; Remove pre-filter and housing; Lift motor out of resting place

1) RemovethePre-lterandHousingfromthebowl(See“Fountain
Disassembly and Cleaning”)
2) Gently lift the motor out of its resting place. Suction cups on the bottom
of the motor will hold it in place. A small amount of force may be
necessary.
3) Oncethemotorisoutofthefountain,withyourthumbandforenger,
gently squeeze on either side of the intake plate, and pull off. It may be
necessarytoinsertangernailintotheseamoftheinletplatetopryitoff.
MOTOR MAINTENANCE
4) Nextyouwillwanttoremovethestatorbyplacingyourngernailunder
the small lip located on the narrow side of tear drop shaped stator and
pull out.
Stator
Pull-Tab
Cleaning the motor is essential to the longevity of the fountain as well as
the cleanliness of the water.
IMPORTANT: Warranty may be voided if the motor is not cleaned.
Motor/Pump
Impeller
Stator
Intake Plate
Flow Control
Knob
Fig. 4a
p. 7
Fig. 4c
Fig. 4b
Fig. 4d Fig. 4e
www.petfountain.com