EasyManua.ls Logo

DriSteem RX-162-2 User Manual

DriSteem RX-162-2
76 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
RTS
®
Resistive-to-Steam Humidifier
Installation, Operation,
and Maintenance Manual
READ AND SAVE THESE INSTRUCTIONS
Question and Answer IconNeed help?

Do you have a question about the DriSteem RX-162-2 and is the answer not in the manual?

DriSteem RX-162-2 Specifications

General IconGeneral
BrandDriSteem
ModelRX-162-2
CategoryHumidifier
LanguageEnglish

Summary

Warnings and Cautions

Installer Attention and General Warnings

Crucial warnings for installers and emphasis on reading all instructions.

Hot Surfaces and Water Hazards

Warns about severe injury from contact with hot components and steam.

Electrical Hazards and Precautions

Details risks of electric shock, fire, and damage from improper electrical handling.

Cautionary Notes

Highlights cautions regarding hot discharge water and excessive supply water pressure.

Overview

Product Description

Provides a general description of the RTS electric humidifier and its capabilities.

Principle of Operation

Explains how the RTS humidifier generates steam and manages water levels and drainage.

Specifications

Model and Electrical Specifications

Details RTS models, steam capacities, and electrical requirements.

European Specifications

Provides European electrical specifications and capacities for RTS humidifier models.

Model Weights

Lists shipping and operating weights for RX-XX-1 and RX-XX-2 models.

Water Guidelines

Discusses universal water control, supply water guidelines, and fill/drain rates.

Indoor Dimensions

Diagrams and dimensions for indoor units without enclosures for RX-XX-1 and RX-XX-2 models.

Installation

Location and Clearances

Specifies required clearances for -1 and -2 models for service and maintenance.

Mounting Procedures

Instructions for wall and floor stand mounting the humidifier, including safety.

Piping Overview and Details

Overview of steam, supply water, and drain piping for RTS humidifiers.

Drain Water Tempering

Explains automatic and mechanical drain water tempering processes and connections.

Wiring Requirements

Provides wiring diagrams and requirements for the humidifier.

Outdoor Enclosure Installation

Covers overview, mounting, clearances, and piping for outdoor enclosures.

Freeze Protection Piping

Explains freeze protection piping requirements and diagrams for outdoor enclosures.

Operation

Start-Up and Commissioning

Provides a checklist and procedure for safely starting up the humidifier.

Maintenance

Preparation and Safety

Provides cool-down and shutdown procedures before performing maintenance.

Inspection and Tasks

Details annual and seasonal inspection and maintenance tasks for the humidifier.

Component Replacement

Provides detailed steps for replacing components like heaters and control cabinets.

Replacement Parts

RTS Series (-1 & -2) Parts

Diagrams and lists of replacement parts for RTS Humidifier RX Series (-1 & -2) models.

RTS Series (-3 & -4) Parts

Diagrams and lists of replacement parts for RTS Humidifier RX Series (-3 & -4) models.

Heaters and Subpanels

Details heater part numbers and lists subpanel components for replacement.

Related product manuals