Need help?Do you have a question about the DriSteem RX-126-2 and is the answer not in the manual?
General| Brand | DriSteem |
|---|---|
| Model | RX-126-2 |
| Category | Humidifier |
| Language | English |
Defines WARNING and CAUTION indicators for hazardous situations.
Emphasizes reading the manual and proper installation by qualified personnel.
Warns about extremely hot surfaces and water, advising a cool-down procedure.
Details precautions for disconnecting power and preventing shock hazards during maintenance.
Provides a general overview of the RTS electric humidifier and its capabilities.
Explains how the RTS humidifier generates steam and manages water levels.
Lists models, steam capacities, and electrical specifications for various configurations.
Outlines recommended water quality parameters for optimal humidifier performance and warranty.
Details the physical dimensions for indoor installation of RX-XX-1 and RX-XX-2 models.
Provides physical dimensions for indoor installation of RX-XX-3 and RX-XX-4 models.
Specifies required clearances for indoor units for proper service and maintenance.
Guides on choosing an appropriate location considering duct proximity and elevation.
Details wall and floor stand mounting methods for RTS humidifiers.
Provides a general overview of steam, water, and drain piping connections for -1 and -2 units.
Covers support, length, and connection requirements for steam outlet piping.
Details material, pressure, and connection requirements for the supply water line.
Outlines code requirements for drain pipe sizing, air gaps, and installation.
Explains automatic and mechanical methods for tempering hot drain water before discharge.
Describes the optional condensate return piping setup for -1 and -2 stage units.
Details field wiring, grounding, and electrical noise prevention for the humidifier.
Introduces the outdoor enclosure, its approvals, and features for cold climate operation.
Provides guidance on selecting a suitable location for the outdoor enclosure.
Lists the physical dimensions of outdoor enclosures for -1/-2 and -3/-4 models.
Explains methods for mounting the outdoor enclosure on pads, curbs, or walls.
Specifies required clearances for outdoor enclosures for service and maintenance.
Covers steam outlet options and supply water/drain piping for outdoor enclosures.
Details piping arrangements to prevent freezing in outdoor enclosure installations.
Step-by-step guide for initial power-up and system readiness checks.
A checklist for verifying correct installation and initial operation parameters.
Discusses factors influencing maintenance frequency and water quality impact.
Outlines essential steps like cooling down the unit and performing shutdown procedures.
Covers annual and seasonal inspection tasks, including probe cleaning and tank inspection.
Provides detailed procedures for replacing heaters and control cabinet components.
Lists replacement part numbers and descriptions for -1 and -2 model humidifiers.
Lists replacement part numbers and descriptions for -3 and -4 model humidifiers.
Details part numbers for various heater configurations based on model and power.
Identifies replacement parts for the subpanel assembly of -1 and -2 models.
Lists replacement parts for the subpanel assembly used in -3 and -4 models.
To Next Page