Need help?Do you have a question about the DriSteem RX-75-1 and is the answer not in the manual?
General| Model | RX-75-1 |
|---|---|
| Power Supply | Electric |
| Water Connection | 1/2" NPT |
| Type | Steam Humidifier |
| Capacity | 75 lb/h (34 kg/h) |
| Steam Output | 75 lb/h (34 kg/h) |
| Phase | 3 |
Guidance for installers on manual reading and compliance with codes.
Emphasizes reading all warnings and instructions to avoid hazards.
Warning about extremely hot surfaces and water, requiring cool down before maintenance.
Safety procedure for disconnecting electrical power before maintenance.
Warning about severe injury or death from electric shock due to energized circuits.
Caution regarding hot discharge water and potential damage to drain plumbing.
Caution about high supply water pressure causing humidifier overflow.
Describes the RTS electric humidifier's purpose and basic function.
Explains the step-by-step process of how the humidifier generates steam.
Details the various RTS models, their steam capacities, and electrical requirements.
Provides electrical specifications for European voltage and frequency.
Lists shipping and operating weights for different enclosure types.
Specifies recommended guidelines for supply water quality to ensure reliability.
Provides physical dimensions for indoor and no enclosure models.
Provides physical dimensions for larger indoor and no enclosure models.
Guidance on choosing an appropriate installation site considering duct proximity and elevation.
Details on how to securely mount the humidifier to a wall or floor stand.
General overview of steam, supply water, and drain piping connections.
Instructions for supporting and connecting steam outlet piping.
Guidelines for connecting the supply water line, including pressure requirements.
Instructions for drain line configuration and code requirements.
Explains automatic and mechanical drain water tempering for safety.
Instructions for connecting the condensate return line.
Details electrical wiring standards and connections for safe operation.
General description of the outdoor enclosure's features and purpose.
Guidance on selecting a suitable location for the outdoor enclosure.
Provides physical dimensions for the outdoor enclosure.
Instructions for mounting the outdoor enclosure on various surfaces.
Specifies required clearances around the outdoor enclosure for service.
Details on piping to prevent freezing in cold climates.
Step-by-step guide for initiating the humidifier after installation.
A checklist to ensure all pre-operation steps are completed correctly.
General guidance on determining maintenance frequency based on usage and water quality.
Steps to safely prepare the humidifier for maintenance, including cool down.
Procedures for annual and seasonal inspection and cleaning of components.
Detailed instructions for replacing heaters, control cabinets, and tanks.
Illustrated list of replacement parts for -1 and -2 models.
Illustrated list of replacement parts for -3 and -4 models.
Table listing heater quantities and part numbers for different models.
Diagram and part numbers for the subpanel components.
Diagram and part numbers for the subpanel components.
Details the standard two-year warranty terms and conditions.
Information on purchasing an extended warranty for additional coverage.
To Next Page