EasyManua.ls Logo

DriSteem RX-24-1 User Manual

DriSteem RX-24-1
76 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
RTS
®
Resistive-to-Steam Humidifier
Installation, Operation,
and Maintenance Manual
READ AND SAVE THESE INSTRUCTIONS
Question and Answer IconNeed help?

Do you have a question about the DriSteem RX-24-1 and is the answer not in the manual?

DriSteem RX-24-1 Specifications

General IconGeneral
ModelRX-24-1
TypeElectric Steam Humidifier
Capacity24 lbs/hr (10.9 kg/hr)
Control TypeModulating
Water Connection1/2" NPT
Phase1
Voltage208-240V

Summary

Warnings and cautions

Attention installer

Guidance for installers regarding safety and compliance with codes.

Hot surfaces and hot water

Warning about extremely hot surfaces and water in the system.

Disconnect electrical power

Instructions and warnings regarding safe electrical power disconnection.

Hot discharge water

Caution regarding hot discharge water and its effect on drain plumbing.

Excessive supply water pressure

Warning that excessive supply water pressure can lead to humidifier overflow.

OVERVIEW

Product overview

Description of the RTS electric humidifier and its capabilities.

Principle of operation

Explanation of how the RTS humidifier generates and dispenses steam.

SPECIFICATIONS

Models, capacities, and electrical specifications

Table detailing model capacities and electrical requirements.

Models, capacities, and electrical specifications (Europe)

Electrical specifications for European models.

Weights: RX-XX-1 and RX-XX-2

Table showing shipping and operating weights for specific models.

Weights: RX-XX-3 and RX-XX-4

Table showing shipping and operating weights for specific models.

Water

Guidelines for supply water quality to ensure reliability and minimize maintenance.

Indoor unit dimensions (RX-XX-1 and RX-XX-2)

Diagram illustrating dimensions for indoor units without enclosures.

Indoor unit dimensions (RX-XX-3 and RX-XX-4)

Diagram illustrating dimensions for indoor units without enclosures.

INSTALLATION

Location and clearance recommendations (Indoor)

Recommended clearances for indoor units for service and maintenance.

Selecting a location

Factors to consider when choosing a location for the humidifier.

Mounting

Instructions for wall mounting the humidifier.

Piping Overview

Overview of field piping for units, including supply water and drain.

Piping: Steam

Guidelines for supporting and connecting steam piping.

Piping: Supply water piping

Information on supply water piping materials, pressure, and connections.

Piping: Drain

Governing code requirements for drain pipe size and configuration.

Piping: Drain water tempering

Explanation of automatic and mechanical drain water tempering.

Wiring

Guidelines for humidifier field wiring and preventing electrical noise.

Outdoor enclosure: Overview

General description of the outdoor enclosure and its features.

Outdoor enclosure: Operation

Operation of the outdoor enclosure, including heater and fan functions.

Outdoor enclosure: Location

Information on locating the outdoor enclosure and consulting local authorities.

Outdoor enclosure: Dimensions

Diagrams and dimensions for outdoor enclosures.

Outdoor enclosure: Mounting

Instructions for mounting the outdoor enclosure on pads, curbs, or walls.

Outdoor enclosure: Clearances

Recommended clearances for outdoor enclosures.

Outdoor enclosure: Piping

Steam outlet options and supply water/drain considerations for outdoor enclosures.

Outdoor enclosure: Freeze protection piping

Piping diagram and notes for freeze protection in outdoor installations.

OPERATION

Start-up

Steps and checklist for the initial startup of the humidifier.

Start-up commissioning checklist

Checklist for verifying installation, settings, and water pressure.

MAINTENANCE

Overview

Guidance on determining maintenance frequency based on operation and water quality.

Preparing for maintenance

Steps to safely prepare the humidifier for maintenance procedures.

Inspection and maintenance

Procedures for annual and seasonal inspection and cleaning of components.

Component replacement

Detailed steps for disassembling and assembling heaters and related parts.

REPLACEMENT PARTS

RTS Humidifier RX Series (-1 & -2)

Exploded view and parts list for -1 and -2 series models.

RTS Humidifier RX Series (-3 & -4)

Exploded view and parts list for -3 and -4 series models.

Heaters

Table listing heater part numbers by model and capacity.

Subpanel for -1 and -2 models

Diagram and part numbers for the subpanel components.

Subpanel for -3 and -4 models

Diagram and part numbers for the subpanel components.

WARRANTY

Two-year Limited Warranty

Details of the manufacturer's standard limited warranty.

Extended warranty

Information on purchasing additional extended warranty coverage.

Related product manuals