Need help?Do you have a question about the DriSteem RX-12-1 and is the answer not in the manual?
General| Model | RX-12-1 |
|---|---|
| Type | Electric Steam Humidifier |
| Voltage | 208/240V |
| Power Consumption | 12 kW |
| Capacity | 12 lbs/hr (5.4 kg/hr) |
| Steam Output | 12 lbs/hr |
| Phase | 1 phase |
| Water Connection | 1/2 inch NPT |
Instructions for installers regarding compliance with codes and potential hazards.
Warns about high temperatures of surfaces and water, and the invisibility of steam.
Crucial safety steps before work, including disconnection and shock hazards.
Warnings about hot discharge water and excessive supply water pressure.
Details performance and electrical requirements for RTS models.
Provides shipping and operating weights for specific RTS models.
Discusses water quality guidelines and their importance for humidifier reliability.
Illustrates physical dimensions for indoor units.
Specifies required clearances for models for service and maintenance access.
Provides guidance on choosing an appropriate installation site for the humidifier.
Details wall mounting procedures for -1 and -2 stage units, including safety.
Illustrates field piping for units, covering water supply and drain connections.
Covers steam outlet connections and support requirements for steam piping.
Details requirements for supply water piping, including pressure and fittings.
Provides guidance on drain piping requirements, including code adherence and air gaps.
Explains automatic and mechanical drain water tempering methods.
Illustrates condensate return piping for -1 and -2 stage units.
Discusses humidifier field wiring, grounding, and preventing electrical noise.
General description of the outdoor enclosure and its features.
Describes mounting procedures for outdoor enclosures, including lift points.
Specifies clearance recommendations for outdoor enclosures.
Details freeze protection piping for outdoor enclosures.
Provides a checklist for system installation and connections before start-up.
A detailed checklist for verifying installation and readiness for operation.
Outlines the step-by-step procedure for starting up the humidifier.
Explains how to determine maintenance frequency based on operation and water quality.
Details the crucial cool-down procedure before performing maintenance.
Covers annual and seasonal inspection tasks, including probe cleaning.
Provides detailed disassembly and assembly steps for heater replacement.
Illustrates and lists replacement parts for -1 and -2 models.
Illustrates and lists replacement parts for -3 and -4 models.
Details heater quantities and part numbers for various RTS models.
Lists replacement parts for the subpanel of -1 and -2 models.
Lists replacement parts for the subpanel of -3 and -4 models.
Outlines the standard warranty terms and conditions for DriSteem products.
Explains the options for purchasing an extended warranty after the initial period.
To Next Page