Need help?Do you have a question about the DriSteem RX-216-3 and is the answer not in the manual?
General| Model | RX-216-3 |
|---|---|
| Power Supply | 3-phase |
| Type | Steam Humidifier |
| Voltage | 208V, 240V, 480V |
| Amperage | Varies by voltage |
Instructions for qualified HVAC and electrical contractors regarding product installation and safety compliance.
Emphasizes reading the entire manual before service or maintenance to avoid hazards.
Warns about extreme temperatures of surfaces and water, advising cool-down procedures.
Critical safety step before installation or maintenance to prevent shock, fire, or injury.
Details risks of electric shock during maintenance and precautions for safe operation.
Caution regarding hot discharge water temperature and potential damage to plumbing.
Warns that high supply water pressure can cause humidifier overflow.
Describes the RTS electric humidifier's function in providing comfort humidity and its basic operation.
Explains the step-by-step process of how the RTS humidifier generates and dispenses steam.
Details the technical specifications, including steam capacity and electrical requirements for various RTS models.
Provides technical specifications for RTS models tailored for European electrical standards.
Lists shipping and operating weights for RX-XX-1 and RX-XX-2 humidifier models in different configurations.
Details shipping and operating weights for RX-XX-3 and RX-XX-4 humidifier models in various configurations.
Discusses universal water control and guidelines for supply water quality for optimal performance.
Presents dimensional data for indoor, non-enclosed RX-XX-1 and RX-XX-2 humidifier units.
Provides dimensional data for indoor, non-enclosed RX-XX-3 and RX-XX-4 humidifier units.
Specifies required clearances around indoor units for safe service and maintenance access.
Guides on choosing an optimal installation site considering duct proximity, elevation, and utilities.
Details procedures for wall mounting the humidifier, emphasizing safety and proper support.
Illustrates general field piping requirements for steam, water supply, and drain connections.
Covers steam piping support, connections, and recommended hose lengths for optimal performance.
Explains requirements for supply water piping, including material, pressure, and fittings.
Outlines governing code requirements and best practices for drain piping installation and configuration.
Describes automatic and mechanical methods for tempering hot drain water before discharge.
Provides essential guidelines for field wiring, grounding, and preventing electrical noise for safe operation.
Introduces the outdoor enclosure, its approvals, features, and mounting considerations.
Explains how the outdoor enclosure's heater and fans manage internal temperature for reliable operation.
Provides guidance on selecting appropriate outdoor installation sites, considering local codes and environmental factors.
Lists the physical dimensions of the outdoor enclosure for -1/-2 and -3/-4 models.
Details methods for mounting the outdoor enclosure on pads, curbs, or walls, including lifting procedures.
Specifies required clearances around outdoor enclosures for service and maintenance access.
Covers steam outlet options, and supply water/drain considerations for outdoor enclosures.
Explains how to implement freeze protection piping for outdoor units in cold climates.
Guides on initial setup and verification steps before powering on the humidifier for the first time.
A detailed checklist to ensure all installation and configuration steps are completed correctly before operation.
Provides the step-by-step procedure for powering on and initiating the humidifier's operation.
Discusses factors influencing maintenance frequency, such as water quality and usage, and general safety precautions.
Outlines the necessary steps to safely prepare the humidifier for maintenance, including cool-down procedures.
Details annual and seasonal inspection tasks, including checking for leaks, probe cleaning, and heater inspection.
Provides step-by-step instructions for disassembling and replacing key components like heaters and control cabinets.
Lists replacement parts for the RTS Humidifier RX Series models -1 and -2, with part numbers and quantities.
Lists replacement parts for the RTS Humidifier RX Series models -3 and -4, with part numbers and quantities.
Details heater quantities and part numbers for various RTS humidifier models based on their specifications.
Identifies replacement parts for the subpanel of RTS Humidifier models -1 and -2.
Lists replacement parts for the subpanel of RTS Humidifier models -3 and -4.
Outlines the terms and conditions of the standard two-year limited warranty provided by DriSteem.
Explains the option to purchase an extended warranty to cover the product beyond the initial warranty period.
To Next Page