Drive DeVilbiss Titan LTE - Troubleshooting

Page 16
Titan LTE Owners Handbook (Issued 07/17)
TROUBLESHOOTING
The powerchair will diagnose faults that arise with the powerchair. The power button / status indicator
will flash red a number of times in a series to indicate the fault. The flash sequences are described
below.
Flash Code
Description
Recommended Action
1
Remote / Joystick error
Release the joystick and restart the powerchair if
required.
2
Configuration error
Unplug the charger from the powerchair.
Recharge the battery.
Check cables, connectors and charger.
3
Left Motor error
Check the cables and connectors
4
Right Motor error
Check the cables and connectors
5
Left Brake error
Check the powerchair is in Drive mode
Check the cables and connectors
6
Powerchair Brake error
Check the powerchair is in Drive mode
Check the cables and connectors
7
Module error
Check the cables and connectors
All faults disable the controller and require the controller to be turned off then on again once the source
of the fault is removed. If errors persist and/or the above actions do not resolve the fault, then contact
your dealer.