Drive Medical Premium Seat Riser with
Removable Arms
How to install the 12402 and 12403
12402/12403 Installation
1. Remove product from carton and READ ALL INSTRUCTIONS CAREFULLY
before attempting to install product.
2. If installation of arms is desired:
a. Place one arm at a time into the arm holes on the raised toilet seat (the brass
buttons on the arm should be facing out, away from the toilet seat.)
b. Depress the brass button in the front of the arm while sliding the arm into
position. You will hear a “click” when the button is positioned properly. (You
will see the brass button pop through the position hole.)
c. Repeat process for back of arm.
d. Repeat process for the other arm.
e. To remove the arm, depress the brass button while pulling up on the arm.
Repeat for the back of the arm.
To Next Page
Need help?
General
