Scout Owner’s Manual www.drivemedical.com
VIII. ASSEMBLY & DISASSEMBLY
Step 2:
Loosen the tiller angle adjustment knob,
and raise the tiller to the desired height.
Tighten the angle adjustment knob to
secure the tiller in place.
Step 3:
Lower the battery pack in to the
compartment on the scooter. Rotate the
battery lock over the battery pack, and
lock to secure the batteries in place.
Step 4:
While lifting up on the seat release lever,
place the seat onto the seat post.
Release the lever and rotate the seat
until it locks into place.
To Next Page
Loading...
Need help?
General
