If the drone drift forward or
backward when hovering,
press the Backward Trim
button or the Forward Trim
button to adjust.
If the drone drift leftward or
rightward when hovering,
press the Rightward Trim
button or the Leftward
Trim button to adjust.
6.6.3 Flight Trimming
This is one of the default settings in the drone. When you release the Left Control Stick after
the ascending/descending action, the drone will hover at the current flight height. For a stable
flight, press the trim buttons to adjust accordingly.
6.7 Altitude Hold / Hover
Press the Headless button to activate the function. In this mode, the drone will fly following
the direction of the Right Control Stick regardless of the position of your drone’s head or
the tail. The LED on the drone will flash and there is beeping sound from the remote. Press
the same button again to exit this mode.
Please familiarize with the Headless Mode function first before using this mode, otherwise
it is easy to lose the drone and cause unnecessary loss.
6.8 Headless Mode
Standard Mode Headless Mode
09
To Next Page
Loading...