2
1. INTRODUCTION
This User and Maintenance Manualrefer toDropsa’s“SMART3 “ Oil lubrication Pump for oil and fluid grease.
You can find additional copies and newer revisions of this document from our website http://www.dropsa.com. Alternatively
contact one of our Sales Offices.
This manual contains important information on health and safety issues for personnel. It is recommended to attentively read
this manual and carefully keep it in good condition so that it is always available to personnel requiring to consult it.
2. GENERAL DESCRIPTION
SMART3 is a compact and versatile electric gear pump package particularly suited for machine tool and work centre lubrication
systems using 33V injector systems.
The versatility of this product is thanks to a wide range of electric motors and the fact it is available with a Dropsa optical switch
that can work with both oil and fluid greases.
The lubrication cycle can be determined either externally by a host PLC or by selecting a model with the built in controller board
that will operate and monitor the system accordingly.
3. PRODUCT-MACHINE IDENTIFICATION
Machine identification yellow label is located on the front
side of the reservoir and contains product serial number,
input voltage and details of the operating parameters.
To Next Page
Loading...
Need help?
General
