2120
Riding and accelerator lever control instructions (continued)
The rider must understand and follow the riding instructions below.
For any rider below the age of an adult (as defined by law), parental or adult supervision is required
at all times when the product is in use and the rider is following the riding instructions below.
1) Hold the product steady by the handlebars while pushing up the kickstand until the kickstand is securely
in the UP position.
2) Ensure both footpegs are folded outward all the way.
3) Ensure the rider is seated in proper and upright position, wearing safety gear and secure footwear,
and has both feet ready to balance on the footpegs.
4) Place the ignition key inside the ignition and turn the key to the right to turn on the motor.
• The ignition key must stay in the ignition while the product is in use.
5) To engage the accelerator, the rider should use their right thumb to gently press the accelerator lever
(located on the right handlebar).
Riding and accelerator lever control instructions (continued)
6) When the rider presses the accelerator lever DOWNWARD the speed will increase. When the rider
gradually releases the accelerator lever, the speed will decrease.
7) While powered on with the accelerator engaged, the product will continuously move forward,
until the accelerator lever is released and the brake is engaged. **
8) There is NO REVERSE function for this product. The product moves in a forward motion ONLY,
when powered on and the accelerator and motor are engaged.
9) The rider should KEEP HANDS ON HANDLEBARS AT ALL TIMES while the product is in use.
** It is strongly recommended that any rider below the age of an adult (as defined by law) - together with
a parental / adult supervisor - conduct multiple short practice runs (how to ride, stop, and brake safely)
in a safe location at the lowest speed level, only GRADUALLY increasing the speed when all parties
are comfortable doing so.
To Next Page
Loading...
