e. Kickstand (pre-installed)
1312
Getting to know your Blipper Packaging contents
The Blipper comes with the following items in the packaging box.
Please identify and locate all of the following prior to assembly:
1) Blipper electric rideable product
a. Pre-assembled frame
b. Handlebar (attached to frame but must be installed)
c. Brake lever (pre-installed on handlebar with 1 screw)
d. Ignition key (set of 2)
2) Battery charger
3) Tool kit
a. 5 mm allen wrench
b. 10 mm wrench
c. 13 mm wrench
d. Handlebar clamps (x 4)
e. Handlebar clamp nuts (x 4), for final assembly
f. Handlebar clamp screws (x 4), for final assembly
4) User manual
Handlebar
Accelerator
lever
Battery level indicator
Seat
Brake lever
Brake cable
Headlight switch
Frame
Front tire
Rear tire
Tire valve cap
Ignition key
Ignition cable
Motor
Rear brake
Ignition
Kickstand
Headlight
Footpegs
Battery pack
Charging port
To Next Page
Loading...
