DSC Envoy NT9010 - Recording and Playing Voice Memos from; Remote Phone

8
3. When the playback is finished, the NT9010 will say “Press [
✱
] to erase. Press [#]
to save”.
Recording and
Playing Voice
Memos from
a Remote
Phone
To record a voice memo from a remote phone:
1. Press .
• Press , the NT9010 will say “For memo functions, press [7]“, then
• Press , the NT9010 will say “To record memo, press [1]. To playback
memo, press [2]“, then
• Press , the NT9010 will say “Record memo now. To complete press [#]“.
2. Speak into the telephone. When you have finished recording, press . The
NT9010 will say “To record memo, press [1]. To playback memo, press [2]“.
3. Press to exit this function.
To listen to a voice memo from a remote phone:
1. Press .
• Press , the NT9010 will say “For memo functions, press [7]“, then
• Press , the NT9010 will say “To record memo, press [1]. To playback
memo, press [2]“, then
• Press , the NT9010 beings to playback your voice memo.
• Press will cancel the playback.
2. When the playback is finished, the NT9010 will say “Press [
✱
] to erase. Press [#]
to save”.
NOTE:
Press [
✱
] will only erase the notification of the memo, not the memo
itself. After the notification has been erased, press [#] will not restore the
notification. But you will still be able to listen to the memo by press Play-
back.
• Once you made your choice, the NT9010 will say “To record memo, press
[1]. To playback memo, press [2]“.
3. Press to exit this function.
1
7
*
*
7
1
#
#
27
*
*
7
2
#
#