5
• Single Partition Access Code
ENTER YOUR
ACCESS CODE
The user enters a valid single partition access code.
[*] TO VIEW < >
SYSTEM TROUBLES
This message will be displayed if there are troubles on the system and the
installer has enabled the option “GLB KYPD TRB” in the system toggles
section.
VIEW TROUBLE < >
(TROUBLE MESSAGE)
Press [✱] to view the troubles on the system. The user can scroll through
the troubles by using the [<][>] keys.
(PARTITION LABEL)
[*] TO ARM < >
This message will be displayed if the partition is ready to be armed. Press
the [✱] key to arm.
WARNING
BYPASS ACTIVE
This message will be displayed for 3 seconds if the partition is armed with
zones bypassed.
PARTITION ARMED
WITH OPEN ZONES
This message will be displayed for 3 seconds if the partition is armed with
force armable zones open.
EXIT DELAY
IN PROGRESS...
This message will be displayed for 3 seconds when a partition is armed.
ENTER YOUR
ACCESS CODE
After the exit delay in progress message has been displayed the keypad
will return to this message.
(PARTITION LABEL) <>
* FOR OPEN ZONES
If the partition is not ready to be armed because of open zones on the
partition, this message will be displayed.
ZONE OPEN < >
(ZONE LABEL) O
Press the [✱] key to view the open zones on the partition. Open zones can
be viewed by pressing the [<] [>] keys.
[*]TO BYPASS
ALL OPEN ZONES
To Next Page
Loading...
Need help?
General