6
After all open zones have been viewed the user will be given the option to
bypass all open zones. To bypass all open zones press the [✱] key.
(PARTITION LABEL) <>
UNABLE TO ARM
This message will be displayed if the partition is not ready to be armed
because of something other then open zones on the partition.
(PARTITION LABEL)
[*] TO DISARM < >
This message will be displayed if the partition is armed.
NO ALARMS
IN MEMORY
Press the [✱] key to disarm the partition. If the partition is disarmed and no
alarms occurred during the current armed period this message will be
displayed for 3 seconds.
ALARM MEMORY < >
(PARTITION LABEL)
If the partition is disarmed with alarms in memory, this message is
displayed. Press the [<][>] keys to scroll through the partitions that have
alarm memory on them.
[*]FOR OTHER
OPTIONS < >
If the user wishes to perform a function to a partition that is not available
through the global menu, the keypad can be loaned to the desired
partition be pressing the [✱] key at this option.
ACCESSING
(PARTITION LABEL)
When a keypad is loaned to another partition this message will be
displayed for 3 seconds. Once the keypad is loaned to another partition, it
will function as if it was a keypad that belonged to that partition. The user
will be able to perform all [✱] functions (e.g. [✱] [7] Door Strike) and
disarm the panel using conventional methods.
EXITING FROM
(PARTITION LABEL)
The keypad will return to global mode after 20 seconds of no key presses
made (this time is programmable by the installer). The keypad will also
return to global mode if the [#] key is pressed. This message will be
displayed for 3 seconds then the keypad will return to global mode.
• Multi-partition Access Code
ENTER YOUR
ACCESS CODE
The user enters a valid multi partition access code.
To Next Page
Loading...
Need help?
General