7
[*] TO VIEW < >
SYSTEM TROUBLES
This message will be displayed if there are troubles on the system and the
installer has enabled the option “GLB KYPD TRB” in the system toggles
section.
VIEW TROUBLE < >
(TROUBLE MESSAGE)
Press [✱] to view the troubles on the system. The user can scroll through
the troubles by using the [<][>] keys.
[*] TO ARM < >
YOUR PARTITIONS
This message will be displayed if all partitions that the access code
belongs to are ready to be armed. Press the [✱] key to arm all partitions
that the code belongs to. The panel will only arm partitions that belong to
the entered access code.
UNABLE TO ARM
YOUR PARTITIONS
This message will be displayed if any one of the partitions that the access
code belongs to is not ready to be armed.
[*] TO DISARM < >
YOUR PARTITIONS
This message will be displayed if any of the partitions that the access
code belongs to are armed. Press the [✱] key to disarm all partitions that
the access code belongs to. The panel will only disarm partitions that
belong to the entered access code.
(PARTITION LABEL)
[*] TO ARM < >
Press the [<][>] keys to scroll through the partitions. Note that only
partitions that belong to the access code entered can be viewed. This
message will be displayed if the partition is ready to be armed. Press the
[✱] key to arm.
WARNING
BYPASS ACTIVE
This message will be displayed for 3 seconds if the partition is armed with
zones bypassed.
PARTITION ARMED
WITH OPEN ZONES
This message will be displayed for 3 seconds if the partition is armed with
force armable zones open.
EXIT DELAY
IN PROGRESS...
This message will be displayed for 3 seconds when a partition is armed.
To Next Page
Loading...
Need help?
General