8
ENTER YOUR
ACCESS CODE
After the exit delay in progress message has been displayed the keypad
will return to this message.
(PARTITION LABEL) <>
* FOR OPEN ZONES
If the partition is not ready to be armed because of open zones on the
partition, this message will be displayed.
ZONE OPEN < >
(ZONE LABEL) O
Press the [✱] key to view the open zones on the partition. Open zones can
be viewed by pressing the [<] [>] keys.
[*]TO BYPASS
ALL OPEN ZONES
After all open zones have been viewed the user will be given the option to
bypass all open zones. To bypass all open zones press the [✱] key.
(PARTITION LABEL) <>
UNABLE TO ARM
This message will be displayed if the partition is not ready to be armed
because of something other then open zones on the partition.
(PARTITION LABEL)
[*] TO DISARM < >
This message will be displayed if the partition is armed.
NO ALARMS
IN MEMORY
Press the [✱] key to disarm the partition. If the partition is disarmed and no
alarms occurred during the current armed period this message will be
displayed for 3 seconds.
ALARM MEMORY < >
(PARTITION LABEL)
If the partition is disarmed with alarms in memory, this message is
displayed. Press the [<][>] keys to scroll through the partitions that have
alarm memory on them.
[*]FOR OTHER
OPTIONS < >
If the user wishes to perform a function to a partition that is not available
through the global menu, the keypad can be loaned to the desired
partition.
[*]TO SELECT
(PARTITION LABEL)
Press the [<][>] keys to scroll to the desired partition, then press the [✱]
key.
To Next Page
Loading...
Need help?
General