DSC PC1500

3
Entry Delay Off Arming
If you wish to arm your system and eliminate the entry delay, enter [
∗
][9] before
your access code. The “Armed” light will flash as a reminder that the system is
armed and has no entry delay. An entry through any zone programmed as a
delay zone will create an instant alarm.
e.g. To arm without entry delay, press [
∗
][9][access code]
Disarming the System
Enter the premises only through the door(s) designated by your installer as the
entry door. Entering by any other door will sound an immediate alarm. As soon
as the entry door is opened, the keypad sounder will come on to indicate that
the system should be disarmed. Go to the keypad and enter your four digit
access code. If an error is made entering the code, press the [#] key and enter
your code again. As soon as the correct code is entered, the “Armed” light will
go out and the keypad sounder will silence.
The correct access code must be entered before the entry time expires. The
entry time delay may be changed by your installer. If an alarm occurred during
the period the system was armed, the “Memory” light and the zone light of the
zone that caused the alarm will flash for two minutes. After the two minute period,
the “Memory” light and zone light will stop flashing and the panel will return to
the ready state. Pressing the [#] key during the two minute period will cancel
the alarm memory display.
If a trouble is present when the panel is disarmed, the “trouble” light will come
ON (See Viewing Trouble Conditions section to determine the source of the
trouble.) Note that troubles will not display while the system is in the Alarm
Memory Display Mode.
If you return home and find that an alarm has occurred while you were away, it
is possible that an intruder may still be on the premises. Go to a neighbour's
house, and call the local police to investigate.
Quick Arm Feature
When the Quick-Arm feature is enabled, the system may be armed by simply
pressing [
∗
][0] instead of the 4 digit access code. This feature allows a person
to arm but not disarm the system.
Enter [
∗
][6][Master Code][4] to turn the Quick-Arm feature ON and OFF. When
the command is entered, the keypad buzzer will beep 3 times if Quick-Arm is
being enabled and will sound one long beep if it is being disabled.
Press [#] to return to Ready.
Door Chime Feature
The door chime feature is used, while the panel is disarmed, to provide a tone from
the keypad each time a door or window is opened or closed. The doors and
windows which will provide this indication are programmed by your installer.
Enter [
∗
][6][Master Code][6] to turn the door chime feature ON and OFF. When
the command is entered, the keypad buzzer will beep 3 times if the door chime
feature is being enabled, and will sound one long beep if it is being disabled.
Press [#] to return to Ready.
LIMITED WARRANTY
Digital Security Controls Ltd. warrants the original
purchaser that for a period of twelve months from the
date of purchase, the product shall be free of defects
in materials and workmanship under normal use.
During the warranty period, Digital Security Controls
Ltd. shall, at its option, repair or replace any defec-
tive product upon return of the product to its factory,
at no charge for labour and materials. Any replace-
ment and/or repaired parts are warranted for the re-
mainder of the original warranty or ninety (90) days,
whichever is longer. The original owner must
promptly notify Digital Security Controls Ltd. in writ-
ing that there is defect in material or workmanship,
such written notice to be received in all events prior
to expiration of the warranty period.
International Warranty
The warranty for international customers is the same
as for any customer within Canada and the United
States, with the exception that Digital Security Con-
trols Ltd. shall not be responsible for any customs fees,
taxes, or VAT that may be due.
Warranty Procedure
To obtain service under this warranty, please return the
item(s) in question to the point of purchase. All autho-
rized distributors and dealers have a warranty program.
Anyone returning goods to Digital Security Controls
Ltd. must first obtain an authorization number. Digital
Security Controls Ltd. will not accept any shipment
whatsoever for which prior authorization has not been
obtained.
Conditions to Void Warranty
This warranty applies only to defects in parts and work-
manship relating to normal use. It does not cover:
• damage incurred in shipping or handling;
• damage caused by disaster such as fire, flood, wind,
earthquake or lightning;
• damage due to causes beyond the control of Digital
Security Controls Ltd. such as excessive voltage,
mechanical shock or water damage;
• damage caused by unauthorized attachment, alter-
ations, modifications or foreign objects;
• damage caused by peripherals (unless such periph-
erals were supplied by Digital Security Controls
Ltd.);
• defects caused by failure to provide a suitable in-
stallation environment for the products;
• damage caused by use of the products for purposes
other than those for which it was designed;
• damage from improper maintenance;
• damage arising out of any other abuse, mishandling
or improper application of the products.
Digital Security Controls Ltd.’s liability for failure
to repair the product under this warranty after a rea-
sonable number of attempts will be limited to a re-
placement of the product, as the exclusive remedy for
breach of warranty. Under no circumstances shall
Digital Security Controls Ltd. be liable for any spe-
cial, incidental, or consequential damages based upon
breach of warranty, breach of contract, negligence,
strict liability, or any other legal theory. Such dam-
ages include, but are not limited to, loss of profits,
loss of the product or any associated equipment, cost
of capital, cost of substitute or replacement equip-
ment, facilities or services, down time, purchaser’s
time, the claims of third parties, including custom-
ers, and injury to property.
Disclaimer of Warranties
This warranty contains the entire warranty and
shall be in lieu of any and all other warranties,
whether expressed or implied (including all implied
warranties of merchantability or fitness for a par-
ticular purpose) And of all other obligations or li-
abilities on the part of Digital Security Controls Ltd.
Digital Security Controls Ltd. neither assumes nor
authorizes any other person purporting to act on
its behalf to modify or to change this warranty, nor
to assume for it any other warranty or liability con-
cerning this product.
This disclaimer of warranties and limited warranty
are governed by the laws of the province of Ontario,
Canada.
WARNING: Digital Security Controls Ltd. recom-
mends that the entire system be completely tested on a
regular basis. However, despite frequent testing, and
due to, but not limited to, criminal tampering or elec-
trical disruption, it is possible for this product to fail
to perform as expected.
Out of Warranty Repairs
Digital Security Controls Ltd. will at its option repair
or replace out-of-warranty products which are re-
turned to its factory according to the following con-
ditions. Anyone returning goods to Digital Security
Controls Ltd. must first obtain an authorization num-
ber. Digital Security Controls Ltd. will not accept any
shipment whatsoever for which prior authorization has
not been obtained.
Products which Digital Security Controls Ltd. deter-
mines to be repairable will be repaired and returned. A
set fee which Digital Security Controls Ltd. has prede-
termined and which may be revised from time to time,
will be charged for each unit repaired.
Products which Digital Security Controls Ltd. deter-
mines not to be repairable will be replaced by the near-
est equivalent product available at that time. The cur-
rent market price of the replacement product will be
charged for each replacement unit.