12
[13] [*][7][1] Command Output Option #1: A valid
access code may need to be entered.
[14] [*][7][2] Reset (Command Output Option #2): As
described above.
[15] For future use
[16] [*][0] Quick Exit: As described above.
[17] [*][1] Reactivate Stay/Away Zones
[18] - [20] For future use
3.6 Features Available for the LCD5500Z
These features are only available for LCD5500Z keypads with
zone inputs:
Automatic Scrolling of Alarms in Memory
The LCD5500Z keypad allows automatic scrolling through
alarms in memory while the keypad is idle. This feature, if
enabled, will override the clock display. This option can be
programmed in LCD programming section [66], option [4].
24 Hour Time Display Option
The LCD5500Z can be programmed to display time using a
24- hour clock, instead of a 12-hour, am/pm clock. This option
can be programmed in LCD programming section [66], option
[3].
Keypad Zones
See 2.12
“Keypad Zones”
on page 7.
Viewing Troubles While Armed
See
“[*][2] Trouble Display”
on page 9 for information on how
to view troubles.
Backlighting Boost
The LCD5500Z, PC55XXZ and PC1555RKZ zone input key-
pads will provide extra number pad lighting when any key is
pressed. The backlighting boost will last for an additional 30
seconds after the last keypress.
To Next Page
Loading...
