DSC PC1555

Programming Work sheets
39
[351] Miscellaneous Maintenance Reporting Codes (Section 5.8 “Communicator – Reporting Codes” on pg. 18, & Appendix A)
I_______I_______I 1. Telephone Number 1 FTC Restore I_______I_______I 5. DLS Lead OUT
I_______I_______I 2. Telephone Number 2 FTC Restore I_______I_______I 6. Zone Fault Alarm
I_______I_______I 3. Event Buffer 75% Full Since Last Upload I_______I_______I 7. Zone Fault Restore
I_______I_______I 4. DLS Lead IN I_______I_______I 8. Delinquency Code
[352] Test Transmission Reporting Codes
(Section 5.8 “Communicator – Reporting Codes” on pg. 18, & Appendix A)
I_______I_______I 1. Periodic Test Transmission I_______I_______I 3. LINKS1000 Test Transmission Code*
I_______I_______I 2. System Test
*The LINKS Test Transmission Code must be programmed as “00” for the LINKS Test Transmission to be disabled.
[353] Wireless Maintenance Reporting Codes
(Section 5.8 “Communicator – Reporting Codes” on pg. 18, & Appendix A)
I_______I_______I 1. Wireless Device Low Battery Alarm I_______I_______I 2. Wireless Device Low Battery Restore
[360] Communicator Format Options
(Section 5.9 “Communicator – Reporting Formats” on page 19)
NOTE:The Third telephone number follows the format of the First telephone number.
Default
02 I_______I_______I 1st/3rd Telephone Number
02 I_______I_______I 2nd Telephone Number
01 20 BPS, 1400 HZ handshake 04 SIA FSK
02 20 BPS, 2300 HZ handshake 05 Pager
03 DTMF CONTACT ID
[361] Alarm/Restore Communicator Call Directions
(Section 5.5 “Communicator – Dialing” on page 17)
Default Option ON OFF
ON I_______I 1 1st Telephone Number Disabled
OFF
I_______I 2 2nd Telephone Number Disabled
OFF I_______I 3 1st Telephone Number (via LINKS) Disabled
OFF I_______I 4 2nd Telephone Number (via LINKS) Disabled
OFF
I_______I 5-8 For future use
[363] Tamper/Restore Communicator Call Directions
(Section 5.5 “Communicator – Dialing” on page 17)
Default Option ON OFF
ON I________I 1 1st Telephone Number Disabled
OFF I________I 2 2nd Telephone Number Disabled
OFF I________I 3 1st Telephone Number (via LINKS) Disabled
OFF
I________I 4 2nd Telephone Number (via LINKS) Disabled
OFF I________I 5-8 For future use
[365] Opening/Closing Communicator Call Directions
(Section 5.5 “Communicator – Dialing” on page 17)
Default Option ON OFF
ON I________I 1 1st Telephone Number Disabled
OFF
I________I 2 2nd Telephone Number Disabled
OFF I________I 3 1st Telephone Number (via LINKS) Disabled
OFF I________I 4 2nd Telephone Number (via LINKS) Disabled
OFF
I________I 5-8 For future use
[367] System Maintenance Alarm/Restore Communicator Call Directions
(Section 5.5 “Communicator – Dialing” on page 17)
Default Option ON OFF
ON I________I 1 1st Telephone Number Disabled
OFF I________I 2 2nd Telephone Number Disabled
OFF I________I 3 1st Telephone Number (via LINKS) Disabled
OFF
I________I 4 2nd Telephone Number (via LINKS) Disabled
OFF I________I 5-8 For future use