DSC PC1832 series - User Manual

To Next Page

Page 1

DSC PC 1832 series Alarm Dialler wiring & programming RDC_3049_E_TA

DSC PC1832 series Alarm Panel

 Panel Dialler wiring

 Panel Dialler programming

Background:

The PM45 & PM1048-3G (v3) communicator now has a terminal block for the connection of the female 611 fly lead (supplied).

If the Alarm Panel also has a terminal block for PSTN connection, we recommend you use your own cable between the Alarm

Panel dialler and PM45 & PM1048-3G (v3).

This type of installation negates the use of the female 611 fly lead, decreasing your installation time.

For four (4), six (6) and eight (8) pin RJ connectors, please refer to manufactures wiring diagram.

There are four minimum requirements from the Alarm panel for successful communication:

1) Must have an eight (8) digit primary phone. E.g. 12345678 or 55555555.

2) A four (4) digit account number.

3) Must be Contact ID format.

4) Must be set for tone (DTMF) dialling.

5) Optional is open / close reporting, must be enabled for Pocket Secure App.

Dialler Lead wiring between Permaconn and DSC PC 1832 series Alarm Panel:

DSC PC550

Permaconn

Panel

black

red

green

yellow

red

green

black

yellow

Ring

Tip

DSC PC 1832 series

Need help?

Do you have a question about the DSC PC1832 series and is the answer not in the manual?

Summary

DSC PC1832 Series Alarm Panel

Panel Dialler Wiring

Details the physical connection of the dialler lead for the alarm panel.

Panel Dialler Programming

Outlines the essential programming steps for the alarm panel dialler.

DSC PC1832 Series Alarm Panel Programming