DSC PowerSeries Neo 3G2080E User Manual

[844] Panel Absent Trouble Restore
Default (Panel Communications Restore)
_______________________________________
[845] Module Reprogramming
Default (Communicator Programming Updated)
_______________________________________
[846] Firmware Update
Default (Communicator Programming Updated)
_______________________________________
[850] Module
Default (Module)
_______________________________________
[851] Stay Arm
Default (Stay Arm)
_______________________________________
[852] Away Arm
Default (Away Arm)
_______________________________________
[853] Night Arm
Default (Night Arm)
_______________________________________
[854] Disarm
Default (Disarm)
_______________________________________
[855] Activate Command Output 1
Default (Activate Command Output 1)
_______________________________________
[856] Activate Command Output 2
Default (Activate Command Output 2)
_______________________________________
[857] Activate Command Output 3
Default (Activate Command Output 3)
_______________________________________
[858] Activate Command Output 4
Default (Activate Command Output 4)
_______________________________________
[859] Deactivate Command Output 1
Default (Deactivate Command Output 1)
_______________________________________
[860] Deactivate Command Output 2
Default (Deactivate Command Output 2)
_______________________________________
[861] Deactivate Command Output 3
Default (Deactivate Command Output 3)
_______________________________________
[862] Deactivate Command Output 4
Default (Deactivate Command Output 4)
_______________________________________
[863] Bypass
Default (Bypass)
_______________________________________
[864] Unbypass
Default (Unbypass)
_______________________________________
[865] Status Request
Default (Status Request)
_______________________________________
[866] Alarm Memory Request
Default (Alarm Memory Request)
_______________________________________
[867] Help
Default (Help)
_______________________________________
[868] Pay As You Go Balance Request
Default (Balance Request)
_______________________________________
[869] Keypad Message
Default (Keypad Message)
_______________________________________
[870] Function Successful
Default (Successful)
_______________________________________
[871] Function Failure
Default (Unsuccessful)
_______________________________________
[872] Invalid Command
Default (Invalid Command)
_______________________________________
[873] System Stay Armed
Default (Stay Armed)
_______________________________________
[874] System Away Armed
Default (Away Armed)
_______________________________________
[875] System Night Armed
Default (Night Armed)
_______________________________________
[876] System Disarmed Ready
Default (Disarmed Ready)
_______________________________________
[877] System Disarmed, Not Ready
Default (Disarmed Not Ready)
_______________________________________
[878] System In Alarm
Default (is in Alarm)
_______________________________________
[879] Trouble Label
Default (Service is Required)
_______________________________________
[880] No Alarms in Memory
Default (No Alarmsin Memory)
_______________________________________
[881] Pay As You Go Balance
Default (Pay as you go balance:)
_______________________________________
59

DSC PowerSeries Neo 3G2080E Specifications

General

Brand	DSC
Model	PowerSeries Neo 3G2080E
Category	Cell Phone
Language	English