EasyManua.ls Logo

DSC PowerSeries Neo TL280RE

DSC PowerSeries Neo TL280RE
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Trouble
indication
Trouble
Indicator Digit
Possible Causes Trouble Possible Solution
All LEDs
flashing
together
N/A
Boot Loader
Failed
l Disconnect power, then reconnect power to the communicator
module.
Red and
Yellow LEDs
flashing
together
N/A
Initialization
Sequence
l The unit is still initializing please wait while the unit gets its
programming and establishes a connection to all programmed
receivers.
NOTE: This process may take several minutes to complete.
Only Green
LEDs
flashing
N/A
Hardware Default
Jumper
l The hardware default jumper is installed and must be removed. See
Figure 3.
Green LEDs
alternating
N/A
Radio Reset or
Radio Initialization
l If this status persists and the yellow LED shows 5 flashes,confirm that
the SIM card is active.
15

Related product manuals