DSC PowerSeries Product Summary Sheet

Step 3 – Press [2] for Occupancy Setting Setting
The Escort will announce the present Occupancy Setting. Press the [1] key until the desired Occupancy
Setting is announced, then press the [#] key to save and exit.
Step 4 – Press [1] to Set the Temperature
The Escort will announce: ‘Cool Temperature is XX Degrees’
‘Heat Temperature is XX Degrees’
‘To change Cool Temperature, press [1]’
‘To change Heat Temperature, press [2]’
Step 5 – Press [1] to Set the Cool Temperature
The Escort will ask you to enter a two-digit number for the new Cool Temperature set point. After it is
entered, the Escort will read back the new temperature set point.
Step 6 – Press [2] to Set the Heat Temperature
The Escort will ask you to enter a two-digit number for the new Heat Temperature set point. After it is
entered, the Escort will read back the new temperature set point.
Continue these steps to program the temperature set points for all the different Occupancy Settings being
used.

DSC PowerSeries Specifications

General

Model	PowerSeries
Category	Security System
Communication	PSTN, IP
Power Supply	16.5VAC
Backup Battery	12V 7Ah
Programming	Via keypad
Compatibility	DSC peripherals and modules