To Next PageTo Next Page
Need help?Do you have a question about the DSC Neo Power HS2016 and is the answer not in the manual?
General| Power Supply | 16.5 VAC, 40 VA |
|---|---|
| Operating Temperature | 0°C to 49°C (32°F to 120°F) |
| Event Buffer | 500 events |
| PGM Outputs | 2 |
| Communications | PSTN |
| Humidity | Up to 85% non-condensing |
| Keypads | Up to 8 |
Explains keypad icons and LEDs for different series.
Lists the various keypad models available for the system.
Details the methods and procedures for setting the alarm system.
Details how to set the system in Stay mode via the keypad.
Explains the process and options for bypassing zones.
Covers audible notifications for setting errors and exit faults.
Details the methods for unsetting the alarm system.
Overview of the security system's components and basic operation.
Instructions for performing regular system tests.
Explains the system's monitoring capabilities.
Describes different alarm sounds and their meanings.
Actions to take for a fire alarm event.
Details of CO alarm sounds and response.
Information on intrusion alarm sounds and response.
How to view past alarms recorded in memory.
How to use 2-way wireless keys for system control.
Information on using MPT proximity tags for system access.
How to control the system via SMS messages.
Format and examples for sending SMS commands.
Lists available SMS commands and their notes.
Details the different types of user access codes.
Procedures for managing user access codes.
How to enroll or delete proximity tags for users.
How to assign user codes to specific partitions.
How to configure extra options for users.
How to view the system's event buffer.
Instructions for setting the system's time and date.
How to enable or disable the auto set/unset feature.
How to configure the automatic set time for the system.
Procedures for resetting the alarm system.
How to perform a system walk test.
Explains various trouble conditions and their meanings.
Overview of partitioning the system and keypad behavior.
Explains fire and CO zone types and their behavior.
How to enable or disable the entry/exit door chime.
Feature for 2-way audio communication during alarms.
How to activate and schedule command outputs.
Sequential detection for confirmed burglary alarms.
CE compliance information for the product.
EN50131 compliance details for the system.
UK specific compliance information and notes.
Guidelines for maintaining and troubleshooting the system, including cleaning and issue resolution.
Guidance on locating and installing smoke detectors.
Steps for developing a family fire escape plan.
Recommended locations for CO detectors.
Section to record system details like delay times.
Fields for central station and installer contact details.
Space to record access codes and zone information.
