Chapter 8
2. Press [*] to open a days of the week sub menu. Scroll the days of the week and press
[*] to set the time for that day.
OR
If using an ICN or LED keypad to select the desired day press [1-7] where 1=
Sunday and 7=Saturday.
Press (*) for <>
Sunday
3. Using a 24 hour format, set the desired time. After you enter the fourth digit the
screen will revert back to the previous day of the week menu. Entering the time 9999
disables the late to open feature for that day. When using an ICN or LED keypad the
time will not display.
Set 24Hr Time
Enter HH:MM 9999
4. Continue setting the time for the desired days of the week. When finished press [#] to
return to the Ready state.
Note:If you enter an invalid time the error tone will sound.
8.8 Changing the Brightness of the LCD keypad
To change the LCD brightness LCD Display
1. From the User Function menu use the shortcut key [1][2] or press to scroll
to Bright Control and press [*].
Press (*) for <>
Bright Control
2. Enter the 2 digit value or scroll to the desired brightness level and press [*] to return
to the previous menu.
Brightness <>
Level... XX
3. Press [#] to return to the Ready state.
8.9 Changing the Contrast of the LCD keypad
To change the LCD contrast LCD Display
1. From the User Function menu use the shortcut key [1][3] or press to scroll
to Contrast Control and press [*].
Press (*) for <>
Contrast Control
2. Enter the 2 digit value or scroll to the desired contrast level and press [#] to return to
the previous menu.
Contrast <>
Level... XX
3. Press [#] to return to the Ready state.
8.10 Setting the Buzzer volume
To change Buzzer volume LCD Display
1. From the User Function menu use the shortcut key [1][4] or press to scroll
to Contrast Control and press [*].
Press (*) for <>
Buzzer Control
2. Enter the 2 digit value or scroll to the desired volume level and press [#] to return to
the previous menu.
Buzzer <>
Level... XX
3. Press [#]to return to the Ready state.
8.11 Setting the Voice Prompt volume
This feature is only available when using an HS2LCDWFPV wireless keypad.
To change Voice Prompt volume LCD Display
1. From the User Function menu use the shortcut key [1][5] or press to scroll
to Voice Prompt and press [*].
Press (*) for <>
Voice Prompt
2. Enter the 2 digit value or scroll to the desired volume level and press to return to the
previous menu.
Voice Prompt <>
Level... XX
3. Press [#] to return to the Ready state.
8.12 Setting the Voice Chime volume
This feature is only available when using an HS2LCDWFPV wireless keypad.
To change Voice Chime volume LCD Display
1. From the User Function menu use the shortcut key [1][6]or press to scroll to
Voice Chime and press [*].
Press (*) for <>
Voice Chime
2. Enter the 2 digit value or scroll to the desired volume level and press [#] to return to
the previous menu.
Voice Chime <>
Level... XX
- 28 -