14
Calling for
Help
All keypads have three pairs of emergency keys. Using these keys you can send an immedi-
ate Fire, Auxiliary or Panic message to your central station.
Press both keys for two seconds to send a Fire message, and to trigger a fire
alarm on the system.
Press both keys for two seconds to send an Auxiliary message.
Press both keys for two seconds to send a Panic message.
IMPORTANT:The Fire, Auxiliary and Panic keys will NOT function unless
turned ON by the installer. If your installer has turned these keys ON, and
enabled audible feedback, holding down the keys for two seconds will
cause the keypad sounder to beep indicating that the alarm input has been
accepted and transmission to the central station is underway.
To Next Page
Loading...
Need help?
General
