Quick Reference Guide
The following chart lists the basic functions of your system alphabetically, and the keys to press for
each function. Refer to the listed page number for more information.
NOTE: Some functions may not be available on your system. Ask your installer for more
information.
To do this: Press this: See page:
Arm system (Away): ................................[access code], leave through entry/exit door 7
OR press (if enabled)
Arm system (No Entry Delay): .................. [access code] 9
Arm system (Quick, if enabled): ............... (from Ready state) 9
Arm system (Stay):...................................[access code], do not exit premises 8
OR press (if enabled)
Bypass zones: .......................................... [two-digit zone number(s)], to exit 15
Disarm system: ........................................ [access code] 11
Exit premises when system armed: .......... OR press (if enabled) 11
Reset smoke detectors............................. OR press (if enabled) 12
Send Fire message:.................................. (press & hold for 2 seconds, if enabled) 14
Send Auxiliary message: .......................... (press & hold for 2 seconds, if enabled) 14
Send Panic message: ............................... (press & hold for 2 seconds, if enabled) 14
Set time and date:................................... [master code] 21
Silence fire alarm:....................................[access code] 12
Silence intrusion alarm: ...........................[access code] 13
Test system.............................................. [master code] 18
Turn door chime on/off:............................. to toggle on or off 19
OR press (if enabled)
Turn on bypassed zones (if Stay armed): .. OR press (if enabled) 9
View alarm memory: ............................... 13
View event buffer.................................... [master code], scroll to View Event Buffer 18
View troubles .......................................... 17
Away
Stay
Exit
Reset
Chime
Away
To Next Page
Loading...
Need help?
General
